Browse Source

isisd: Add new adjacency to LSP neighbor list

isis_pdu.c :
New adjacency did not always get added to LSP neighbor list.

The adjacencies that were created once minimum time allowed before LSP
retransmission had surpassed, instantly got their LSP regenerated, but
the adjacency circuit type was not set to IIH PDU circuit type before
the LSP was regenerated , hence didn't pass the check for adjacency
circuit type in lsp_build(), and the adjacency was not added to neighbor list.

When a new adjacency is up, to build LSP with neighbor entry corresponding
to the adjacency, set adjacency circuit type to circuit type from hello PDU
header before new LSP is regenerated/built. This will result in the new
adjacency entry getting added to the LSP neighbor list TLV.

Signed-off-by: Amritha Nambiar <>
Amritha Nambiar 6 years ago
1 changed files with 7 additions and 1 deletions
  1. 7 1

+ 7 - 1

@@ -601,6 +601,13 @@ process_p2p_hello (struct isis_circuit *circuit)
           adj->level = hdr->circuit_t;
       circuit->u.p2p.neighbor = adj;
+      /* Build lsp with the new neighbor entry when a new
+       * adjacency is formed. Set adjacency circuit type to
+       * IIH PDU header circuit type before lsp is regenerated
+       * when an adjacency is up. This will result in the new
+       * adjacency entry getting added to the lsp tlv neighbor list.
+       */
+      adj->circuit_t = hdr->circuit_t;
       isis_adj_state_change (adj, ISIS_ADJ_INITIALIZING, NULL);
       adj->sys_type = ISIS_SYSTYPE_UNKNOWN;
@@ -886,7 +893,6 @@ process_p2p_hello (struct isis_circuit *circuit)
-  adj->circuit_t = hdr->circuit_t;
   if (isis->debugs & DEBUG_ADJ_PACKETS)