cli_summary.txt 2.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990
  1. Summary of CLI commands, expanded for Opaque-LSA/MPLS-TE.
  2. ---------------------------------------------------------
  3. router>
  4. show ip ospf database (asbr-summary|external|max-age|network|router|self-originate|summary|opaque-link|opaque-area|opaque-external)
  5. show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) (self-originate|)
  6. show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D
  7. show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D (self-originate|)
  8. show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D adv-router A.B.C.D
  9. show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) adv-router A.B.C.D
  10. --> Add database items: opaque-link, opaque-area, opaque-external
  11. show mpls-te interface [INTERFACE]
  12. --> Show current MPLS-TE link-TLV parameters.
  13. If [INTERFACE] is omitted, all interfaces will be displayed.
  14. show mpls-te router
  15. --> Show current MPLS-TE Router-TLV parameters.
  16. router> enable
  17. router#
  18. router# configure terminal
  19. router(config)# interface [INTERFACE]
  20. router(config-if)#
  21. mpls-te link max-bw BANDWIDTH
  22. --> Set MPLS-TE link-TLV parameter: Maximum Bandwidth (Bytes/sec).
  23. In integer or floating point format (1000, or 1.0e3)
  24. mpls-te link max-rsv-bw BANDWIDTH
  25. --> Set MPLS-TE link-TLV parameter: Maximum Reservable Bandwidth (Bytes/sec).
  26. In integer or floating point format (1000, or 1.0e3)
  27. mpls-te link metric <0-4294967295>
  28. --> Set MPLS-TE link-TLV parameter: MPLS-TE metric.
  29. mpls-te link rsc-clsclr BITPATTERN
  30. --> Set MPLS-TE link-TLV parameter: Resource Class/Color.
  31. In 32-bit hexadecimal format, with leading "0x" (0x0 - 0xffffffff)
  32. mpls-te link unrsv-bw <0-7> BANDWIDTH
  33. --> Set MPLS-TE link-TLV parameter: Unreserved Bandwidth (Bytes/sec).
  34. In integer or floating point format (1000, or 1.0e3)
  35. router(config-if)# exit
  36. router(config)# router ospf
  37. router(config-router)#
  38. mpls-te
  39. --> Enable MPLS-TE functionality.
  40. Note that master-switch "ospf opaque-lsa" must also be specified.
  41. mpls-te on
  42. --> Alias of "mpls-te" command.
  43. mpls-te router-address A.B.C.D
  44. --> Set MPLS-TE Router-TLV parameter: Router Address.
  45. no mpls-te
  46. --> Disable MPLS-TE functionality.
  47. no ospf opaque-lsa
  48. --> Disable Opaque-LSAs capability.
  49. This node behaves Opaque-incapable node.
  50. ospf opaque-lsa
  51. --> Enable Opaque-LSAs capability.
  52. This is the master-switch to make this node Opaque-capable.
  53. router# exit