NEWS 72 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595
  1. Note: this file lists major user-visible changes only.
  2. * Changes in Quagga []
  3. - [zebra] "no link-detect" is no longer the default.
  4. The previous release of Quagga always explicitly writes-out the
  5. link-detect configuration state. Therefore, to retain current behavior
  6. save your config with the prior release before updating.
  7. Otherwise, review your configuration. Note, most users will generally
  8. want to have link-detect enabled, and so can just remove 'no
  9. link-detect' from their interface configuration.
  10. This release also adds a global configuration to specify the default,
  11. which can be specified in the zebra configuration as:
  12. default link-detect (on|off)
  13. This will then apply to any interface which does not have link-detect
  14. explicitly configured.
  15. * Changes in Quagga 0.99.24
  16. User-visible changes:
  17. - [pimd] New daemon: pimd provides IPv4 PIM-SSM multicast routing.
  18. - [bgpd] New feature: "next-hop-self all" to override nexthop on iBGP route
  19. reflector setups.
  20. - [bgpd] route-maps have a new action "set ipv6 next-hop peer-address"
  21. - [bgpd] route-maps have a new action "set as-path prepend last-as"
  22. - [bgpd] Update validity checking (particularly MP-BGP / IPv6 routes) was
  23. touched up significantly. Please report possible bugs.
  24. - [ripd] New feature: RIP for IPv4 now supports equal-cost multipath (ECMP)
  25. - [zebra] Multicast RIB support has been extended. It still is IPv4 only.
  26. - [zebra] "no link-detect" is now printed in configurations since it won't
  27. be the default anymore soon. To retain current behaviour, re-save your
  28. configuration after updating to 0.99.24.
  29. Distributor-visible changes:
  30. - --enable-pimd is added to enable pimd. It is considered experimental, though
  31. unless the distribution target is embedded systems with little flash, there
  32. is no reason to not include it in packages.
  33. - --disable-ipv6 no longer exists as an option. It's 2015, your C library
  34. really needs to have IPv6 support by now.
  35. - --disable-netlink no longer exists as an option. It didn't work anyway.
  36. - --disable-solaris no longer exists as an option. It only controlled some
  37. init scripts.
  38. - --enable-isisd is now the default.
  39. - mrlg.cgi is no longer included (it was severely outdated). It can be found
  40. independently at http://mrlg.op-sec.us/
  41. - build on Linux with the musl C library should now work
  42. * Changes in Quagga 0.99.23
  43. Known issues:
  44. - [bgpd] setting an extcommunity in a route map on a route that already has
  45. an extcommunity attribute will cause bgpd to crash. This issue will be
  46. fixed in a followup minor release.
  47. User-visible changes:
  48. - [lib] Performance enhancements on hashes and timers.
  49. - [bgpd] New feature: iBGP TTL security.
  50. - [bgpd] New feature: relaxed bestpath criteria for multipath and improved
  51. display of multipath routes in "show ip bgp". Scripts parsing this output
  52. may need to be updated.
  53. - [bgpd] Multiprotocol peerings over IPv6 now try to find a more appropriate
  54. IPv4 nexthop by looking at the interface.
  55. - [ospf6d] A large amount of changes has been merged for ospf6d. Careful
  56. evaluation prior to deployment is recommended.
  57. - [zebra] Recursive route support has been overhauled. Scripts parsing
  58. "show ip route" output may need adaptation.
  59. - [zebra] IPv6 address management has been improved regarding tentative
  60. addresses. This is visible in that a freshly configured address will not
  61. immediately be marked as usable.
  62. - [*] a lot of bugs have been fixed, please refer to the git log
  63. * Changes in Quagga 0.99.22
  64. - [bgpd] The semantics of default-originate route-map have changed.
  65. The route-map is now used to advertise the default route conditionally.
  66. The old behaviour which allowed to set attributes on the originated
  67. default route is no longer supported.
  68. - [bgpd] There is now a replace-as option to neighbor ... local-as ...
  69. no-prepend. For details, refer to the user documentation.
  70. - [zebra] An FPM interface has been added. This provides an alternate
  71. interface to routing information and is geared at OpenFlow & co.
  72. - [snmp] AgentX is now supported; the old smux backend is considered
  73. deprecated. ospf6d has also had OSPFV3-MIB added.
  74. - [*] several issues with configuration save/load/apply have been fixed,
  75. in particular on ospf "max-metric router-lsa administrative" and
  76. "distribute-list", bgpd "no neighbor activate", isisd "metric-style",
  77. - [*] a lot of bugs have been fixed, please refer to the git log
  78. * Changes in Quagga 0.99.21
  79. - [bgpd] BGP multipath support has been merged
  80. - [bgpd] SAFI (Multicast topology) support has been extended to propagate
  81. the topology to zebra.
  82. - [bgpd] AS path limit functionality has been removed
  83. - [babeld] a new routing daemon implementing the BABEL ad-hoc mesh routing
  84. protocol has been merged.
  85. - [isisd] a major overhaul has been picked up. Please note that isisd is
  86. STILL NOT SUITABLE FOR PRODUCTION USE.
  87. - [*] a lot of bugs have been fixed, please refer to the git log
  88. * Changes in Quagga 0.99.10
  89. - [bgpd] 4-byte AS support added
  90. - [bgpd] MRT format changes to version 2. Those relying on
  91. bgpd MRT table dumps may need to update their tools.
  92. - [bgpd] Added new route-map set statement: "as-path exclude"
  93. - Zebra RIB updates queue has evolved into a multi-level
  94. structure to address RIB consistency issues.
  95. * Changes in Quagga 0.99.2
  96. - [bgpd] Work queues added to bgpd to split up update processing,
  97. particularly beneficial when a peer session goes down. AS_PATH
  98. parsing rewritten to be clearer, more robust and ready for 4-byte.
  99. - [ripd] Simple authentication is no longer the default authentication
  100. mode for ripd. The default is now no-authentication. Any setups which
  101. used simple authentication will probably need to update their
  102. configuration manually.
  103. - [ospfd] 1s dead-interval with sub-second Hellos feature added.
  104. SPF timers now specified in milliseconds, and with adaptive
  105. hold-time support. RFC3137 Stub-router support added. Default ABR
  106. type is now 'cisco'.
  107. - Solaris least privileges support added.
  108. * Changes in Quagga 0.99.1
  109. - Zserv is now buffered via threads and non-blocking in most cases for both
  110. clients and zebra, which should improve responsiveness of daemons when
  111. they must send many messages to zebra.
  112. - 'show thread cpu' now displays both cpu+system and wall-clock time,
  113. where getrusage() is available.
  114. - Background threads added and workqueue API added, with a
  115. 'show work-queues' command. Thread scheduling improved slightly.
  116. - Zebra now has a work-queue for RIB processing. See 'show work-queues' in
  117. the zebra daemon vty.
  118. - Support for interface renaming on Linux netlink systems.
  119. - GNU Zebra bgpd merges, including BGP Graceful-restart and "match ip
  120. route-source" command.
  121. - Automatic logging of backtraces should daemons crash to assist in
  122. diagnosis. See the documentation for more information on configuring
  123. logging correctly, and set --enable-gcc-rdynamic if compiling with gcc.
  124. * Changes in Quagga 0.98.0
  125. - Logging facilities upgraded. One can now specify a severity level
  126. for each logging destination. And a new "show logging" command gives
  127. thorough information on the current logging system configuration.
  128. - Watchquagga daemon added. This is not well tested yet. Please try
  129. monitor mode first before enabling restart features. It is important
  130. to make sure that the various timers are configured with appropriate
  131. values for your site.
  132. - BGP route-server support added. See the texinfo documentation.
  133. - OSPF API initialisation is disabled by default even if compiled in. You
  134. can enable it with -a/--apiserver command line switch.
  135. - "write-config integrated" vtysh command replaced with "service
  136. integrated-vtysh-config" command.
  137. - Router id is now handled by zebra daemon and all daemons receive changes
  138. from it. Router id can be overriden in daemons' configurations of course.
  139. To fix common router id in zebra daemon you can either install non-127
  140. address on loopback or use "router-id x.x.x.x" command.
  141. - "secondary" keyword is removed from ip address configuration. All
  142. supported OS'es have their own vision what's secondary address and
  143. how to handle it.
  144. - Zebra no longer enables forwarding by default. If you rely on zebra to
  145. enable forwarding make sure to add '<ip|ip6> forwarding' statements
  146. to your zebra configuration file.
  147. - All libraries are built and used shared, on platforms where libtool
  148. supports shared libraries.
  149. - Router advertisement syntax is changed. In usual cases (if you didn't do
  150. any fancy stuff) it's enough to change lines in configuration from:
  151. "ipv6 nd prefix-advertisement X:X:X:X::/X 2592000 604800 autoconfig on-link"
  152. to:
  153. "ipv6 nd prefix X:X:X:X::/X"
  154. All router advertisement options are documented in texi documentation.
  155. - --enable-nssa configure switch is removed. NSSA support is stable enough.
  156. - Daemons don't look at current directory for config file any more.
  157. * Changes in Quagga 0.96.5
  158. - include files are installed in $(prefix)/include/quagga. Programs
  159. building against these includes should -I$(prefix)/include and e.g.
  160. #include <quagga/routemap.h>
  161. - New option --enable-exampledir puts example files in a separate
  162. directory from $(sysconfdir), easing NetBSD pkgsrc hierarchy rules
  163. compliance.
  164. - New configure options --enable-configfile-mask and
  165. --enable-logfile-mask to set umask values for config and log
  166. values. Masks default to 0600, matching previous behavior.
  167. - Import current CVS isisd from SourceForge, then merge it with
  168. the Quagga's Framework.
  169. * Changes in Quagga 0.96.4
  170. - Further fixes to ospfd, some relating to the PtP revert. Interface
  171. lookups should be a lot more robust now.
  172. - Fix for a remote triggerable crash in vty layer.
  173. - Improvements to ripd, and addition of split horizon support.
  174. - Improved bgpd table support, now dumps at time of day intervals rather
  175. than time from startup intervals. Much improved support for IPv6 table
  176. dumps. show commands for views improved.
  177. * Changes in Quagga 0.96.3
  178. - revert the 'generic PtP' patch. Means Quagga will no longer work with
  179. FreeSWAN, however, on the plus side this gets rid of a lot of niggly bugs
  180. which the PtP patch introduced.
  181. * Changes in Quagga 0.96.2
  182. - Fix crash in ospfd
  183. * Changes in Quagga 0.96.1
  184. - Iron out problem with the privileges definitions
  185. * Changes in Quagga 0.96
  186. - Privilege support, daemons now run with the minimal privileges needed, see
  187. the documentation for details.
  188. - NSSA ABR support in ospfd.
  189. - OSPF-API support merged in.
  190. - 6WIND patch merged in.
  191. * Changes in zebra-0.93
  192. * Changes in bgpd
  193. ** Configuration is changed to new format.
  194. * Changes in ospfd
  195. ** Crush bugs which reported on Zebra ML is fixed.
  196. ** Opaque LSA and TE LSA support is added by KDD R&D Laboratories,
  197. Inc.
  198. * Chages in ospf6d
  199. ** Many bugs are fixed.
  200. * Changes in zebra-0.92a
  201. * Changes in bgpd
  202. ** Fix "^$" community list bug.
  203. ** Below command's Address Family specific configurations are added
  204. nexthop-self
  205. route-reflector-client
  206. route-server-client
  207. soft-reconfiguration inbound
  208. * Changes in zebra
  209. ** Treat kernel type routes as EGP routes.
  210. * Changes in zebra-0.92
  211. ** Overall security is improved. Default umask is 0077.
  212. * Changes in ripd
  213. ** If output interface is in simple password authentication mode,
  214. substruct one from rtemax.
  215. * Changes in bgpd
  216. ** IPv4 multicast and IPv6 unicast configuration is changed to so
  217. called new config. All of AFI and SAFI specific configuration is
  218. moved to "address-family" node. When you have many IPv6 only
  219. configuration, you will see many "no neighbor X:X::X:X activate" line
  220. in your configuration to disable IPv4 unicast NLRI exchange. In that
  221. case please use "no bgp default ipv4-unicast" command to suppress the
  222. output. Until zebra-0.93, old config is still left for compatibility.
  223. Old config
  224. ==========
  225. router bgp 7675
  226. bgp router-id 10.0.0.1
  227. redistribute connected
  228. network 192.168.0.0/24
  229. neighbor 10.0.0.2 remote-as 7675
  230. ipv6 bgp network 3ffe:506::/33
  231. ipv6 bgp network 3ffe:1800:e800::/40
  232. ipv6 bgp aggregate-address 3ffe:506::/32
  233. ipv6 bgp redistribute connected
  234. ipv6 bgp neighbor 3ffe:506:1000::2 remote-as 1
  235. New config
  236. ==========
  237. router bgp 7675
  238. bgp router-id 10.0.0.1
  239. network 192.168.0.0/24
  240. redistribute connected
  241. neighbor 10.0.0.2 remote-as 7675
  242. neighbor 3ffe:506:1000::2 remote-as 1
  243. no neighbor 3ffe:506:1000::2 activate
  244. !
  245. address-family ipv6
  246. network 3ffe:506::/33
  247. network 3ffe:1800:e800::/40
  248. aggregate-address 3ffe:506::/32
  249. redistribute connected
  250. neighbor 3ffe:506:1000::2 activate
  251. exit-address-family
  252. * Changes in ospfd
  253. ** Internal interface treatment is changed. Now ospfd can handle
  254. multiple IP address for an interface.
  255. ** Redistribution of loopback interface's address works fine.
  256. * Changes in zebra-0.91
  257. ** --enable-oldrib configure option is removed.
  258. ** HAVE_IF_PSEUDO part is removed. Same feature is now supported by
  259. default.
  260. * Changes in ripd
  261. ** When redistributed route is withdrawn, perform poisoned reverse.
  262. * Changes in zebra
  263. ** When interface's address is removed, kernel route pointing out to
  264. the address is removed.
  265. ** IPv6 RIB is now based upon new RIB code.
  266. ** zebra can handle same connected route to one interface.
  267. ** New command for interface address. Currently this commands are
  268. only supported on GNU/Linux with netlink interface.
  269. "ip address A.B.C.D secondary"
  270. "ip address A.B.C.D label LABEL"
  271. * Changes in bgpd
  272. ** BGP flap dampening bugs are fixed.
  273. ** BGP non-blocking TCP connection bug is fixed.
  274. ** "show ip bgp summary" shows AS path and community entry number.
  275. ** New commands have been added.
  276. "show ip bgp cidr-only"
  277. "show ip bgp ipv4 (unicast|multicast) cidr-only"
  278. "show ip bgp A.B.C.D/M longer-prefixes"
  279. "show ip bgp ipv4 (unicast|multicast) A.B.C.D/M longer-prefixes"
  280. "show ipv6 bgp X:X::X:X/M longer-prefixes"
  281. "show ipv6 mbgp X:X::X:X/M longer-prefixes"
  282. ** IPv6 IBGP nexthop change is monitored.
  283. ** Unknown transitive attribute is passed with partial flag bit on.
  284. * Changes in ospfd
  285. ** Fix bug of LSA MaxAge flood.
  286. ** Fix bug of NSSA codes.
  287. * Changes in zebra-0.90
  288. ** From this beta release, --enable-unixdomain and --enable-newrib
  289. becomes default. So both options are removed from configure.in. To
  290. revert old behavior please specify below option.
  291. --enable-tcp-zebra # TCP/IP socket is used for protocol daemon and zebra.
  292. --enable-oldrib # Turn on old RIB implementation.
  293. Old RIB implementation will be removed in zebra-0.91.
  294. ** From this beta release --enable-multipath is supported. This
  295. option is only effective on GNU/Linux kernel with
  296. CONFIG_IP_ADVANCED_ROUTER and CONFIG_IP_ROUTE_MULTIPATH is set.
  297. --enable-multipath=ARG # ARG must be digit. When ARG is 0 unlimit multipath number.
  298. ** From this release we do not include guile files.
  299. * Changes in lib
  300. ** newlist.[ch] is merged with linklist.[ch].
  301. ** Now Zebra works on MacOS X public beta.
  302. ** Access-list can have remark. "access-list WORD remark LINE" define
  303. remark for specified access-list.
  304. ** Key of key-chain is sorted by it's idetifier value.
  305. ** prefix-list rule is slightly changed. The rule of "len <= ge-value
  306. <= le-value" is changed to "len < ge-value <= le-value".
  307. ** According to above prefix-list rule change, add automatic
  308. conversion function of an old rule. ex.) 10.0.0.0/8 ge 8 -> 10.0.0.0/8
  309. le 32
  310. ** SMUX can handle SNMP trap.
  311. ** In our event library, event thread is executed before any other
  312. thread like timer, read and write event.
  313. ** Robust method for writing configuration file and recover from
  314. backing up config file.
  315. ** Display "end" at the end of configuration.
  316. ** Fix memory leak in vtysh_read().
  317. ** Fix memroy leak about access-list and prefix-list name.
  318. * Changes in zebra
  319. ** UNIX domain socket server of zebra protocol is added.
  320. ** Fix PointoPoint interface network bug. The destination network
  321. should be installed into routing table instead of local network.
  322. ** Metric value is reflected to kernel routing table.
  323. ** "show ip route" display uptime of RIP,OSPF,BGP routes.
  324. ** New RIB implementation is added.
  325. Now we have enhanced RIB (routing information base) implementation in
  326. zebra. New RIB has many new features and fixed some bugs which exist
  327. in old RIB code.
  328. *** Static route with distance value
  329. Static route can be specified with administrative distance. The
  330. distance value 255 means it is not installed into the kernel.
  331. Default value of distance for static route is 1.
  332. ip route A.B.C.D/M A.B.C.D <1-255>
  333. ip route A.B.C.D/M IFNAME <1-255>
  334. If the least distance value's route's nexthop are unreachable,
  335. select the least distance value route which has reachable nexthop is
  336. selected.
  337. ip route 0.0.0.0/0 10.0.0.1
  338. ip route 0.0.0.0/0 11.0.0.1 2
  339. In this case, when 10.0.0.1 is unreachable and 11.0.0.1 is
  340. reachable. The route with nexthop 11.0.0.1 will be installed into
  341. forwarding table.
  342. zebra> show ip route
  343. S>* 0.0.0.0/0 [2/0] via 11.0.0.1
  344. S 0.0.0.0/0 [1/0] via 10.0.0.1 inactive
  345. If the nexthop is unreachable "inactive" is displayed. You can
  346. specify any string to IFNAME. There is no need of the interface is
  347. there when you configure the route.
  348. ip route 1.1.1.1/32 ppp0
  349. When ppp0 comes up, the route is installed properly.
  350. *** Multiple nexthop routes for one prefix
  351. Multiple nexthop routes can be specified for one prefix. Even the
  352. kernel support only one nexthop for one prefix user can configure
  353. multiple nexthop.
  354. When you configure routes like below, prefix 10.0.0.1 has three
  355. nexthop.
  356. ip route 10.0.0.1/32 10.0.0.2
  357. ip route 10.0.0.1/32 10.0.0.3
  358. ip route 10.0.0.1/32 eth0
  359. If there is no route to 10.0.0.2 and 10.0.0.3. And interface eth0
  360. is reachable, then the last route is installed into the kernel.
  361. zebra> show ip route
  362. S> 10.0.0.1/32 [1/0] via 10.0.0.2 inactive
  363. via 10.0.0.3 inactive
  364. * is directly connected, eth0
  365. '*' means this nexthop is installed into the kernel.
  366. *** Multipath (more than one nexthop for one prefix) can be installed into the kernel.
  367. When the kernel support multipath, zebra can install multipath
  368. routes into the kernel. Before doing that please make it sure that
  369. setting --enable-multipath=ARG to configure script. ARG must be digit
  370. value. When specify 0 to ARG, there is no limitation of the number
  371. of the multipath. Currently only GNU/Linux with netlink interface is
  372. supported.
  373. ip route 10.0.0.1/32 10.0.0.2
  374. ip route 10.0.0.1/32 10.0.0.3
  375. ip route 10.0.0.1/32 eth0
  376. zebra> show ip route
  377. S>* 10.0.0.1/32 [1/0] via 10.0.0.2
  378. * via 10.0.0.3
  379. is directly connected, eth0
  380. *** Kernel message delete installed route.
  381. After zebra install static or dynamic route into the kernel.
  382. R>* 0.0.0.0/0 [120/3] via 10.0.0.1
  383. If you delete this route outside zebra, old zebra does not reinstall
  384. route again. Now the route is re-processed and properly reinstall the
  385. static or dynamic route into the kernel.
  386. ** GNU/Linux netlink socket handling is improved to fix race condition
  387. between kernel message and user command responce.
  388. * Changes in bgpd
  389. ** Add show neighbor's routes command.
  390. "show ip bgp neighbors (A.B.C.D|X:X::X:X) routes"
  391. "show ip bgp ipv4 (unicast|multicast) neighbors (A.B.C.D|X:X::X:X) routes"
  392. "show ipv6 bgp neighbors (A.B.C.D|X:X::X:X) routes"
  393. "show ipv6 mbgp neighbors (A.B.C.D|X:X::X:X) routes"
  394. ** BGP passive peer support problem is fixed.
  395. ** Redistributed IGP nexthop is passed to BGP nexthop.
  396. ** On multiaccess media, if the nexthop is reachable nexthop is passed
  397. as it is.
  398. ** Remove zebra-0.88 compatibility commands.
  399. "match ip prefix-list WORD"
  400. "match ipv6 prefix-list WORD"
  401. Instead of above please use below commands.
  402. "match ip address prefix-list WORD"
  403. "match ipv6 address prefix-list WORD"
  404. ** Fix bug of holdtimer is not reset when bgp cleared.
  405. ** "show ip bgp summary" display peer establish/drop count.
  406. ** Change "match ip next-hop" argument from IP address to access-list
  407. name.
  408. ** When "bgp enforce-first-as" is enabled, check EBGP peer's update
  409. has it's AS number in the first AS number in AS sequence.
  410. ** New route-map command "set community-delete COMMUNITY-LIST" is
  411. added. Community matched the CoMMUNITY-LIST is removed from the
  412. community.
  413. ** BGP-MIB implementation is finished.
  414. ** When BGP connection comes from unconfigured IP address, close
  415. socket immediately.
  416. ** Do not compare router ID when the routes comes from EBGP peer.
  417. When originator ID is same, take shorter cluster-list route. If
  418. cluster-list is same take smaller IP address neighbor's route.
  419. ** Add "bgp bestpath as-path ignore" command. When this option is
  420. set, do not concider AS path length when route selection.
  421. ** Add "bgp bestpath compare-routerid". When this option is set,
  422. compare router ID when the routes comes from EBGP peer.
  423. ** Add "bgp deterministic-med" process.
  424. ** BGP flap dampening feature is added.
  425. ** When IBGP nexthop is changed, it is reflected to RIB.
  426. ** Change "neighbor route-refresh" command to "neighbor capability
  427. route-refresh".
  428. * Changes in ripd
  429. ** Change "match ip next-hop" argument from IP address to access-list
  430. name.
  431. ** "no ip rip (send|receive)" command accept version number argument.
  432. ** Memory leak related classfull network generation is fixed.
  433. ** When a route is in garbage collection process (invalid with metric
  434. 16) and a router receives the same route with valid metric then route
  435. was not installed into zebra rib, but only into ripd rib. Moreover ,
  436. it will never get into zebra rib, because ripd wrongly assumes it's
  437. already there.
  438. * Change in ospfd
  439. ** Fix bug of refreshing default route.
  440. ** --enable-nssa turn on undergoing NSSA feature.
  441. ** Fix bug of Hello packet's option is not properly set when interface
  442. comes up.
  443. ** Reduce unconditional logging.
  444. ** Add nexthop to OSPF path only when it is not there.
  445. ** When there is no DR on network (suppose you have only one router
  446. with interface priority 0). It's router LSA does not contain the link
  447. information about this network.
  448. ** When you change a priority of interface from/to 0
  449. ISM_NeighborChange event should be scheduled in order to elect new
  450. DR/BDR on the network.
  451. ** When we add some LSA into retransmit list we need to check whether
  452. the present old LSA in retransmit list is not more recent than the new
  453. one.
  454. ** In states Loading and Full the slave must resend its last Database
  455. Description packet in response to duplicate Database Description
  456. packets received from the master. For this reason the slave must wait
  457. RouterDeadInterval seconds before freeing the last Database
  458. Description packet. Reception of a Database Description packet from
  459. the master after this interval will generate a SeqNumberMismatch
  460. neighbor event. RFC2328 Section 10.8
  461. ** Virtual link can not configured in stub area.
  462. ** Clear a ls_upd_queue queue of the interface when interface goes
  463. down.
  464. ** "no router ospf" unregister redistribution requests from zebra.
  465. ** New command for virtual-link configuration is added.
  466. "area A.B.C.D virtual-link A.B.C.D"
  467. "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535>"
  468. "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535> authentication-key AUTH_KEY"
  469. "area A.B.C.D virtual-link A.B.C.D authentication-key AUTH_KEY"
  470. "area A.B.C.D virtual-link A.B.C.D hello-interval <1-65535> retransmit-interval <3-65535> transmit-delay <1-65535> dead-interval <1-65535> message-digest-key <1-255> md5 KEY"
  471. "area A.B.C.D virtual-link A.B.C.D message-digest-key <1-255> md5 KEY"
  472. ** Clear cryptographic sequence number when neighbor status is changed
  473. to NSM down.
  474. ** Make Summary LSA's origination and refreshment as same as other
  475. type of LSA.
  476. ** New OSPF pakcet read method. Now maximum packet length may be 65535
  477. bytes (maximum IP packet length).
  478. ** Checking the age of the found LSA and if the LSA is MAXAGE we
  479. should call refresh instead of originate.
  480. ** Install multipath information to zebra.
  481. ** Fix socket descriptor leak when system call failed.
  482. * Changes in ospf6d
  483. ** Whole functionality has been rewritten as new code. new command
  484. "show ipv6 ospf6 spf node", "show ipv6 ospf6 spf tree", "show ipv6
  485. ospf6 spf table" has been added.
  486. ** Change to do not send garbage route whose nexthop is not linklocal
  487. address.
  488. ** "redistribute ospf6" was generated in "router ospf6" in config
  489. file. It is fixed.
  490. ** LSDB sync bug is fixed.
  491. ** Fix bug of using unavailable route.
  492. * Changes in vtysh
  493. ** route-map and access-list configuration is merged into one
  494. configuration.
  495. ** /usr/local/etc/Zebra.conf is integrated configuration file. "write
  496. memory" in vtysh will write whole configuration to this file.
  497. ** When -b option is specified to vtysh, vtysh read
  498. /usr/local/etc/Zebra.conf file then pass the confuguration to proper
  499. protocol daemon. So make all protocol daemon's configuration file
  500. empty then invoke all daemon. After that vtysh -b will setup saved
  501. configuration.
  502. zebrastart.sh
  503. =============
  504. /usr/local/sbin/zebra -d
  505. /usr/local/sbin/ripd -d
  506. /usr/local/sbin/ospfd -d
  507. /usr/local/sbin/bgpd -d
  508. /usr/local/bin/vtysh -b
  509. * Changes in zebra-0.89
  510. * Changes in lib
  511. ** distribute-list can set all interface's access-list and prefix-list
  512. configuration.
  513. * Changes in ripd
  514. ** "show ip protocols" display proper distribute-list settings and
  515. distance settings.
  516. ** When metric infinity route received withdraw the route from kernel
  517. immediately it used to be wait garbage collection.
  518. ** key-chain can be used for simple password authentication.
  519. ** RIPv2 MIB getnext interface bug is fixed.
  520. * Changes in vtysh
  521. ** --with-libpam enable PAM authentication for vtysh.
  522. ** Now vtysh read vtysh.conf. This file should be
  523. ${SYSCONFDIR}/etc/vtysh.conf for security reason. Usually it is
  524. /usr/local/etc/vtysh.conf.
  525. ** "username WORD nopassword" command is added to vtysh.
  526. * Chagees in ospfd
  527. ** NBMA interface support is added.
  528. ** OSPF area is sorted by area ID.
  529. ** New implementation of OSPF refreesh.
  530. ** OSPF-MIB read function is partly added.
  531. * Changes in bgpd
  532. ** When the peering is done by ebgp-multihop, nexthop is looked up
  533. like IBGP routes.
  534. ** "show ip mbgp" commands are changed to "show ip bgp ipv4
  535. multicast".
  536. ** New terminal commands are added.
  537. "show ip bgp ipv4 (unicast|multicast) filter-list WORD"
  538. "show ip bgp ipv4 (unicast|multicast) community"
  539. "show ip bgp ipv4 (unicast|multicast) community-list WORD"
  540. "show ip bgp ipv4 (unicast|multicast) community-list WORD exact-match"
  541. ** MBGP soft-reconfiguration command is added.
  542. "clear ip bgp x.x.x.x ipv4 (unicast|multicast) in"
  543. "clear ip bgp x.x.x.x ipv4 (unicast|multicast) out"
  544. "clear ip bgp x.x.x.x ipv4 (unicast|multicast) soft"
  545. "clear ip bgp <1-65535> ipv4 (unicast|multicast) in"
  546. "clear ip bgp <1-65535> ipv4 (unicast|multicast) out"
  547. "clear ip bgp <1-65535> ipv4 (unicast|multicast) soft"
  548. "clear ip bgp * ipv4 (unicast|multicast) in"
  549. "clear ip bgp * ipv4 (unicast|multicast) out"
  550. "clear ip bgp * ipv4 (unicast|multicast) soft"
  551. ** MED related commands are added.
  552. "bgp deterministic-med"
  553. "bgp bestpath med confed"
  554. "bgp bestpath med missing-as-worst"
  555. ** "bgp default local-preference" command is added.
  556. ** BGP confederation peer's routes are passed to zebra like IBGP route.
  557. ** Community match command is added.
  558. "show ip bgp community <val>"
  559. "show ip bgp community <val> exact-match"
  560. ** EBGP multihop route treatment bug is fixed. Now nexthop is
  561. resolved by IGP routes.
  562. ** Some commands are added to show routes by filter-list and community
  563. value.
  564. "show ip bgp ipv4 (unicast|multicast) filter-list WORD"
  565. "show ip bgp ipv4 (unicast|multicast) community"
  566. "show ip bgp ipv4 (unicast|multicast) community-list WORD"
  567. "show ip bgp ipv4 (unicast|multicast) community-list WORD exact-match"
  568. * Changes in zebra
  569. ** zebra read interface's address information using getifaddrs() when
  570. it is available.
  571. ** Reflect IPv6 interface's address change to protocol daemons.
  572. * Changes in zebra-0.88
  573. * Changes in lib
  574. ** "exact-match" option is added to "access-list" and "ipv6
  575. access-list" command. If this option is specified, the prefix and
  576. prefix length is compared as exact match mode.
  577. * Changes in zebra
  578. ** New Zebra message ZEBRA_REDISTRIBUTE_DEFAULT_ADD and
  579. ZEBRA_REDISTRIBUTE_DEFAULT_DELTE are added.
  580. ** Default administrative distance value is changed.
  581. Old New
  582. ------------------------------------------
  583. system 10 0
  584. kernel 20 0
  585. connected 30 0
  586. static 40 1
  587. rip 50 120
  588. ripng 50 120
  589. ospf 60 110
  590. ospf6 49 110
  591. bgp 70 200(iBGP) 20(eBGP)
  592. ------------------------------------------
  593. ** Distance value can be passed from protocol daemon to zebra.
  594. ** "show ip route" shows [metric/distance] value pair.
  595. ** Zebra Protocol is changed to support multi-path route and distance
  596. value.
  597. * Changes in ospfd
  598. ** "default-information originate [always]" command is added.
  599. ** "default-metric <0-16777214>" command is added.
  600. ** "show ip ospf database" command is integrated. LS-ID and AdvRouter can
  601. be specifed. The commands are
  602. show ip ospf database TYPE LS-ID
  603. show ip ospf database TYPE LS-ID ADV-ROUTER
  604. show ip ospf database TYPE LS-ID self-originate
  605. show ip ospf database TYPE self-originate
  606. ** route-map support for `redistribute' command are added.
  607. Supported `match' statements are
  608. match interface
  609. match ip address
  610. match next-hop
  611. Supported `set' statements are
  612. set metric
  613. set metric-type
  614. ** Pass OSPF metric value to zebra daemon.
  615. * Changes in ripd
  616. ** When specified route-map does not exist, it means all deny.
  617. ** "default-metric <1-16>" command is added.
  618. ** "offset-list ACCESS-LIST-NAME <0-16>" and "offset-list
  619. ACCESS-LIST-NAME <0-16> IFNAME" commands are added.
  620. ** "redistribute ROUTE-TYPE metric <0-16>" command is added.
  621. ** "default-information originate" command is added.
  622. ** "ip split-horizon" and "no ip split-horizon" is added to interface
  623. configuration.
  624. ** "no router rip" command is added.
  625. ** "ip rip authentication mode (md5|text)" is added to interface
  626. configuration.
  627. ** "ip rip authentication key-chain KEY-CHAIN" is added to interface
  628. configuration.
  629. ** Pass RIP metric value to zebra daemon.
  630. ** Distance manipulation functions are added.
  631. * Changes in bgpd
  632. ** Fix bug of next hop treatment for MPLS-VPN route exchange.
  633. ** BGP peer MIB is updated.
  634. ** Aggregated route has origin IGP, atomic-aggregate and proper
  635. aggregator attribute.
  636. ** Suppressed route now installed into BGP table. It is only
  637. suppressed from announcement.
  638. ** BGP router-id is properly set after "no router bgp ASN" and "router
  639. bgp ASN".
  640. ** Add check for nexthop is accessible or not for IBGP routes.
  641. ** Add cehck for nexthop is on connected or not for EBGP routes.
  642. ** "dump bgp route" command is changed to "dump bgp route-mrt" for
  643. generating MRT compatible dump output.
  644. ** Soft reconfiguration inbound and outbound is supported.
  645. ** Route refresh feature is supported.
  646. * Changes in vtysh
  647. ** VTY shell is now included into the distribution.
  648. * Changes in zebra-0.87
  649. * Changes in lib
  650. ** "show startup-config" command is added.
  651. ** "show history" command is added.
  652. ** Memory statistics command is changed. New command
  653. show memory all
  654. show memory lib
  655. show memory rip
  656. show memory ospf
  657. show memory bgp
  658. are added.
  659. ** Filters can be removed only specify it's name. New command
  660. no access-list NAME
  661. no ip community-list NAME
  662. no ip as-path access-list NAME
  663. no route-map NAME
  664. are added.
  665. ** At any node, user can view/save user configuration.
  666. write terminal
  667. write file
  668. wirte memory
  669. are added to every node in default.
  670. ** LCD completion is added. For example both "ip" and "ipv6" command
  671. are exist, "i" then press TAB will be expanded to "ip".
  672. * Changes in bgpd
  673. ** "show ip bgp" family shows total number of prefixes.
  674. ** "no bgp default ipv4-unicast" command is added.
  675. ** Extended Communities support is added.
  676. ** "no neighbor PEER send-community extended" command is added.
  677. ** MPLS-VPN PE-RR support is added.
  678. New address family vpnv4 unicast is introduced.
  679. !
  680. address-family vpnv4 unicast
  681. neighobr PEER activate
  682. network A.B.C.D rd RD tag TAG
  683. exit-address-family
  684. !
  685. To make it route-reflector, please configure it under normal router
  686. bgp ASN.
  687. !
  688. router bgp 7675
  689. no bgp default ipv4-unicast
  690. bgp router-id 10.0.0.100
  691. bgp cluster-id 10.0.0.100
  692. neighbor 10.0.0.1 remote-as 65535
  693. neighbor 10.0.0.1 route-reflector-client
  694. neighbor 10.0.0.2 remote-as 65535
  695. neighbor 10.0.0.2 route-reflector-client
  696. neighbor 10.0.0.3 remote-as 65535
  697. neighbor 10.0.0.3 route-reflector-client
  698. !
  699. address-family vpnv4 unicast
  700. neighbor 10.0.0.1 activate
  701. neighbor 10.0.0.2 activate
  702. neighbor 10.0.0.3 activate
  703. exit-address-family
  704. !
  705. * Changes in ospfd
  706. ** Many many bugs are fixed.
  707. * Changes in ripd
  708. ** Better interface up/down event handle.
  709. * Changes in zebra
  710. ** Better interface up/down event handle.
  711. * Changes in zebra-0.86
  712. * Changes in lib
  713. ** Fix bug of exec-timeout command which may cause crush.
  714. ** Multiple same policy for "access-list", "ip prefix-list, "as-path
  715. access-list", "ip community-list" is not duplicated.
  716. ** It used to be "ip prefix-list A.B.C.D/M" match routes which mask >=
  717. M. Now default behavior is exact match so it only match routes which
  718. mask == M.
  719. * Changes in bgpd
  720. ** "match ip address prefix-list" is added to route-map.
  721. ** A route without local preference is evaluated as 100 local preference.
  722. ** Select smaller router-id route when other values are same.
  723. ** Compare MED only both routes comes from same neighboring AS.
  724. ** "bgp always-compare-med" command is added.
  725. ** Now MED value is passed to IBGP peer.
  726. ** When neighbor's filter is configured with non-existent access-list,
  727. as-path access-list, ip prefix-list, route-map. The behavior is
  728. changed from all permit to all deny.
  729. * Changes in ospfd
  730. ** Fix bug of external route tag byte order.
  731. ** OSPF Neighbor deletion bug which cause crush is fixed.
  732. ** Some route calculation bug are fixed.
  733. ** Add sanity check with router routing table.
  734. ** Fix bug of memory leak about linklist.
  735. ** Fix bug of 1-WayReceived in NSM.
  736. ** Take care of BIGENDIAN architecture.
  737. ** Fix bug of NSM state flapping between ExStart and Exchange.
  738. ** Fix bug of Network-LSA originated in stub network.
  739. ** Fix bug of MS flag unset.
  740. ** Add to schedule router_lsa origination when the interface cost
  741. changes.
  742. ** Increment LS age by configured interface transmit_delay.
  743. ** distribute-list is reimplemented.
  744. ** Fix bug of refresh never occurs.
  745. ** Fix bug of summary-LSAs reorigination. Correctly copy
  746. OSPF_LSA_APPROVED flag to new LSA. when summary-LSA is reoriginatd.
  747. ** Fix bug of re-origination when a neighbor disappears.
  748. ** Fix bug of segmentation fault with DD retransmission.
  749. ** Fix network-LSA re-origination problem.
  750. ** Fix problem of remaining withdrawn routes on zebra.
  751. * Changes in ripd
  752. ** Do not leave from multicast group when interface goes down bug is
  753. fixed.
  754. * Changes in zebra
  755. ** Remove client structure when client dies.
  756. ** Take care static route when interface goes up/down.
  757. * Changes in zebra-0.85
  758. * Changes in bgpd
  759. ** "transparent-nexthop" and "transparenet-as" commands are added.
  760. ** Route reflector's originator-id bug is fixed.
  761. * Changes in ospfd
  762. ** Fix bug of OSPF LSA memory leak.
  763. ** Fix bug of OSPF external route memory leak.
  764. ** AS-external-LSA origination bug was fixed.
  765. ** LS request treatment is completely rewritten. Now performance is
  766. drastically improved.
  767. * Changes in ripd
  768. ** RIPv1 update is done by class-full manner.
  769. * Changes in zebra-0.84b
  770. * Changes in lib
  771. ** Fix bug of inet_pton return value handling
  772. * Changes in bgpd
  773. ** Fix bug of BGP-4+ link-local address nexthop check for IBGP peer.
  774. ** Don't allocate whole buffer for displaying "show ip bgp". Now it
  775. consume only one screen size memory.
  776. * Changes in ripd
  777. ** Fix debug output string.
  778. ** Add RIP peer handling. RIP peer are shown by "show ip protocols".
  779. * Changes in zebra-0.84a
  780. * Changes in bgpd
  781. ** Fix serious bug of BGP-4+ peering under IPv6 link-local address.
  782. Due to the bug BGP-4+ peering may not be established.
  783. * Changes in zebra-0.84
  784. * Changes in lib
  785. ** IPv6 address and prefix parser is added to VTY by Toshiaki Takada
  786. <takada@zebra.org>. DEFUN string is "X:X::X:X" for IPv6 address,
  787. "X:X::X:X/M" for IPv6 prefix. You can use it like this.
  788. DEFUN (func, cmd, "neighbor (A.B.C.D|X:X::X:X) remote-as <1-65535>")
  789. ** VTY configuration is locked during configuration. This is for
  790. avoiding unconditional crush from two terminals modify the
  791. configuration at the same time. "who" command shows which termnal
  792. lock the configuration. VTY which has '*' character at the head of
  793. line is locking the configuration.
  794. ** Old logging functions are removed. Functions like
  795. log_open,log_close,openlog are deleted. Instead of that please use
  796. zlog_* functions. zvlog_* used in ospf6d are deleted also.
  797. ** "terminal monitor" command is added. "no terminal monitor" is for
  798. disabling. This command simply display logging information to the
  799. VTY.
  800. ** dropline.[ch] files are deleted.
  801. * Changes in bgpd
  802. ** BGP neighbor configuration are sorted by it's IP address.
  803. ** BGP peer configuration and actual peer is separated. This is
  804. preparation for Route Server support.
  805. ** "no neighbor PEER" command is added. You can delete neighbor
  806. without specifying AS number.
  807. ** "no neighbor ebgp-multihop" command is added.
  808. ** "no neighbor port PORT" command is added.
  809. ** To conform RFC1771, "neighbor PEER send-community" is default
  810. behavior. If you want to disable sending community attribute,
  811. please specify "no neighbor PEER send-community" to the peer.
  812. ** "neighbor maximum-prefix NUMBER" command is added.
  813. ** Multi-protocol extention NLRI is proceeded only when the peer is
  814. configured proper Address Family and Subsequent Address Family. If
  815. not, those NLRI are simply ignored.
  816. ** Aggregate-address support is improved. Currently below commands
  817. works.
  818. "aggregate-address"
  819. "aggregate-address summary-only"
  820. "no aggregate-address"
  821. "no aggregate-address summary-only"
  822. "ipv6 bgp aggregate-address"
  823. "ipv6 bgp aggregate-address summary-only"
  824. "no ipv6 bgp aggregate-address"
  825. "no ipv6 bgp aggregate-address summary-only"
  826. ** redistribute route-map bug is fixed.
  827. ** MBGP support becomes default. "configure" option --enable-mbgp is
  828. removed.
  829. ** New command "neighbor PEER timers connect <1-65535>" is added.
  830. ** New command "neighbor PEER override-capability" is added.
  831. ** New command "show ip bgp neighbor A.B.C.D advertised-route" is added.
  832. ** New command "show ip bgp neighbor A.B.C.D routes" is added. To use
  833. this command, you have to configure neighbor with
  834. "neighbor A.B.C.D soft-reconfiguration inbound" beforehand.
  835. * Changes in zebra-0.83
  836. * bgpd
  837. ** Serious bug fix about fetching global and link-local address at the
  838. same time. Due to this bug, corrupted IPv6 prefix is generated. If
  839. you uses bgpd for BGP-4+ please update to this version. The bug is
  840. introduced in zebra-0.82.
  841. ** When bgpd send Notify message, don't use thread manager. It is now
  842. send to neighbor immediately.
  843. * Changes in zebra-0.82
  844. ** Solaris 2.6 support is added by Michael Handler
  845. <handler@sub-rosa.com>.
  846. ** MBGP support is added by Robert Olsson <Robert.Olsson@data.slu.se>.
  847. Please specify --enable-mbgp to configure script. This option will be
  848. removed in the future and MBGP support will be default.
  849. * Changes in zebra
  850. ** When interface goes down, withdraw connected routes from routing
  851. table. When interface goes up, restore the routes to the routing
  852. table.
  853. ** `show interface' show interface's statistics on Linux and BSD with
  854. routing socket.
  855. ** Now zebra can get MTU value on BSDI/OS.
  856. * Changes in bgpd
  857. ** Add capability option support based upon
  858. draft-ietf-idr-bgp4-cap-neg-04.txt.
  859. ** Add `show ipv6 bgp prefix-list' command.
  860. ** Check self AS appeared in received routes.
  861. ** redistribute route-map support is added.
  862. ** BGP packet dump feature compatible with MRT.
  863. * Changes in ripd
  864. ** Fix bug of `timers basic' command's argument format.
  865. * Changes in ripngd
  866. ** Calculate max RTE using interface's MTU value.
  867. * Changes in ospfd
  868. ** Some correction to LSU processing.
  869. ** Add check for lsa->refresh_list.
  870. * Changes in ospf6d
  871. ** Many debug feature is added.
  872. * Changes in zebra-0.81
  873. ** SNMP support is disabled in default.--enable-snmp option is added
  874. to configure script.
  875. * Changes in bgpd
  876. ** Fix FSM bug which introduced in zebra-0.80.
  877. * Changes in zebra-0.80
  878. * access-list
  879. New access-list name space `ipv6 access-list' is added. At the same
  880. time, `access-list' statemant only accepts IPv4 prefix. Please be
  881. careful if you use IPv6 filtering. You will need to change your
  882. configuration. For IPv6 filtering please use `ipv6 access-list'.
  883. As of zebra-0.7x, user can use `access-list' for both IPv4 and IPv6
  884. filtering.
  885. ! zebra-0.7x
  886. access-list DML-net permit 203.181.89.0/24
  887. access-list DML-net permit 3ffe:506::0/32
  888. access-list DML-net deny any
  889. !
  890. Above configuration is not valid for zebra-08x. Please add `ipv6'
  891. before 'access-list' when you configure IPv6 filtering.
  892. ! zebra-0.8x
  893. access-list DML-net permit 203.181.89.0/24
  894. access-list DML-net deny any
  895. !
  896. ipv6 access-list DML-net permit 3ffe:506::0/32
  897. ipv6 access-list DML-net deny any
  898. !
  899. * prefix-list
  900. And also new prefix-list name space `ipv6 prefix-list' is added. It
  901. is the same as the change of `access-list'. `ip prefix-list' now only
  902. accept IPv4 prefix. It was source of confusion that `ip prefix-list'
  903. can be used both IPv4 and IPv6 filtering. Now name space is separated
  904. to clear the meaning of the filter.
  905. If you use `ip prefix-list' for IPv6 filtering, please change the
  906. stetement.
  907. ! zebra-0.7x
  908. ip prefix-list 6bone-filter seq 5 permit 3ffe::/17 le 24 ge 24
  909. ip prefix-list 6bone-filter seq 10 permit 3ffe:8000::/17 le 28 ge 28
  910. ip prefix-list 6bone-filter seq 12 deny 3ffe::/16
  911. ip prefix-list 6bone-filter seq 15 permit 2000::/3 le 16 ge 16
  912. ip prefix-list 6bone-filter seq 20 permit 2001::/16 le 35 ge 35
  913. ip prefix-list 6bone-filter seq 30 deny any
  914. !
  915. Now user can explicitly configure it as IPv6 prefix-list.
  916. ! zebra-0.8x
  917. ipv6 prefix-list 6bone-filter seq 5 permit 3ffe::/17 le 24 ge 24
  918. ipv6 prefix-list 6bone-filter seq 10 permit 3ffe:8000::/17 le 28 ge 28
  919. ipv6 prefix-list 6bone-filter seq 12 deny 3ffe::/16
  920. ipv6 prefix-list 6bone-filter seq 15 permit 2000::/3 le 16 ge 16
  921. ipv6 prefix-list 6bone-filter seq 20 permit 2001::/16 le 35 ge 35
  922. ipv6 prefix-list 6bone-filter seq 30 deny any
  923. !
  924. * RIP configuration
  925. If you want to filter only default route (0.0.0.0/0) and permit other
  926. routes, it was hard to do that. Now `ip prefix-list' can be used for
  927. RIP route filtering.
  928. New statement:
  929. `distribute-list prefix PLIST_NAME (in|out) IFNAME'
  930. is added to ripd. So you can configure on eth0 interface accept all
  931. routes other than default routes.
  932. !
  933. router rip
  934. distribute-list prefix filter-default in eth0
  935. !
  936. ip prefix-list filter-default deny 0.0.0.0/0 le 0
  937. ip prefix-list filter-default permit any
  938. !
  939. * RIPng configuration
  940. Same change is done for ripngd. You can use `ipv6 prefix-list' for
  941. filtering.
  942. !
  943. router ripng
  944. distribute-list prefix filter-default in eth0
  945. !
  946. ipv6 prefix-list filter-default deny ::/0 le 0
  947. ipv6 prefix-list filter-default permit any
  948. !
  949. * BGP configuration
  950. So far, Multiprotocol Extensions for BGP-4 (RFC2283) configuration is
  951. done with traditional IPv4 peering statement like blow.
  952. !
  953. router bgp 7675
  954. neighbor 3ffe:506::1 remote-as 2500
  955. neighbor 3ffe:506::1 prefix-list 6bone-filter out
  956. !
  957. For separating configuration IPv4 and IPv6, and for retaining Cisco
  958. configuration compatibility, now IPv6 configuration is done by IPv6
  959. specific statement. IPv6 BGP configuration is done by statement which
  960. start from `ipv6 bgp'.
  961. !
  962. router bgp 7675
  963. !
  964. ipv6 bgp neighbor 3ffe:506::1 remote-as 2500
  965. ipv6 bgp neighbor 3ffe:506::1 prefix-list 6bone-filter out
  966. !
  967. At the same time some IPv6 specific commands are deleted from IPv4
  968. configuration.
  969. o redistribute ripng
  970. o redistribute ospf6
  971. o neighbor PEER version BGP_VERSION
  972. o neighbor PEER interface IFNAME
  973. Those commands are only accepted as like below.
  974. o ipv6 bgp redistribute ripng
  975. o ipv6 bgp redistribute ospf6
  976. o ipv6 bgp neighbor PEER version BGP_VERSION
  977. o ipv6 bgp neighbor PEER interface IFNAME
  978. And below new commands are added.
  979. o ipv6 bgp network IPV6_PREFIX
  980. o ipv6 bgp redistribute static
  981. o ipv6 bgp redistribute connected
  982. o ipv6 bgp neighbor PEER remote-as <1-65535> [passive]
  983. o ipv6 bgp neighbor PEER ebgp-multihop [TTL]
  984. o ipv6 bgp neighbor PEER description DESCRIPTION
  985. o ipv6 bgp neighbor PEER shutdown
  986. o ipv6 bgp neighbor PEER route-reflector-client
  987. o ipv6 bgp neighbor PEER update-source IFNAME
  988. o ipv6 bgp neighbor PEER next-hop-self
  989. o ipv6 bgp neighbor PEER timers holdtime <0-65535>
  990. o ipv6 bgp neighbor PEER timers keepalive <0-65535>
  991. o ipv6 bgp neighbor PEER send-community
  992. o ipv6 bgp neighbor PEER weight <0-65535>
  993. o ipv6 bgp neighbor PEER default-originate
  994. o ipv6 bgp neighbor PEER filter-list FILTER_LIST_NAME (in|out)
  995. o ipv6 bgp neighbor PEER prefix-list PREFIX_LIST_NAME (in|out)
  996. o ipv6 bgp neighbor PEER distribute-list AS_LIST_NAME (in|out)
  997. o ipv6 bgp neighbor PEER route-map ROUTE_MAP_NAME (in|out)
  998. And some utility commands are introduced.
  999. o clear ipv6 bgp [PEER]
  1000. o show ipv6 bgp neighbors [PEER]
  1001. o show ipv6 bgp summary
  1002. I hope these changes are easy to understand for current Zebra users...
  1003. * To restrict connection to VTY interface.
  1004. It used to be both IPv4 and IPv6 filter can be specified with one
  1005. access-list. Then the access-list can be appried to VTY interface
  1006. with `access-class' stetement in `line vty' node. Below is example in
  1007. zebra-0.7x.
  1008. !
  1009. access-list local-only permit 127.0.0.1/32
  1010. access-list local-only permit ::1/128
  1011. access-list local-only deny any
  1012. !
  1013. line vty
  1014. access-class local-only
  1015. !
  1016. Now IPv4 and IPv6 filter have each name space. It is not possible to
  1017. specify IPv4 and IPv6 filter with one access-list. For setting IPv6
  1018. access-list in `line vty', `ipv6 access-class' statement is
  1019. introduced. Let me show the configuration in zebra-0.8x.
  1020. !
  1021. access-list local-only permit 127.0.0.1/32
  1022. access-list local-only deny any
  1023. !
  1024. ipv6 access-list local-only permit ::1/128
  1025. ipv6 access-list local-only dny any
  1026. !
  1027. line vty
  1028. access-class local-only
  1029. ipv6 access-class local-only
  1030. !
  1031. * route-map
  1032. New IPv6 related route-map match commands are added.
  1033. o match ipv6 address
  1034. o match ipv6 next-hop
  1035. Please change your configuration if you use IP match statement for
  1036. IPv6 route.
  1037. zebra-0.7x config
  1038. =================
  1039. !
  1040. access-list all permit any
  1041. !
  1042. route-map set-nexthop permit 10
  1043. match ip address all
  1044. set ipv6 next-hop global 3ffe:506::1
  1045. set ipv6 next-hop local fe80::cbb5:591a
  1046. !
  1047. zebra-0.8x config
  1048. =================
  1049. !
  1050. ipv6 access-list all permit any
  1051. !
  1052. route-map set-nexthop permit 10
  1053. match ipv6 address all
  1054. set ipv6 next-hop global 3ffe:506::1
  1055. set ipv6 next-hop local fe80::cbb5:591a
  1056. !
  1057. * zebra connection
  1058. Protocol daemon such as ripd, bgpd, ospfd will reconnect zebra daemon
  1059. when the connection fail. Those daemons try to connect zebra every 10
  1060. seconds first three trial, then the interval changed to 60 seconds.
  1061. After all, if ten connections are fail, protocol daemon give up the
  1062. connection to the zebra daemon.
  1063. * SNMP support (is not yet finished)
  1064. Zebra uses SMUX protocol (RFC1227) for making communication with SNMP
  1065. agent. Currently lib/smux.c can be compiled only with ucd-snmp-4.0.1
  1066. and http://ucd-snmp.ucdavis.edu/patches/012.patch. It can not be
  1067. compiled with ucd-snmp-3.6.2.
  1068. After applying the patch to ucd-snmp-4.0.1, please configure it with
  1069. SMUX module.
  1070. % configure --with-mib-modules=smux
  1071. After compile & install ucd-snmp-4.0.1, you will need to configure
  1072. smuxpeer. I'm now using below configuration.
  1073. /usr/local/share/snmp/snmpd.conf
  1074. ================================
  1075. smuxpeer 1.3.6.1.6.3.1 test
  1076. Above 1.3.6.1.6.3.1 and test is temporary configuration which is hard
  1077. coded in lib/smux.c. Yes, I know it is bad, I'll change it ASAP.
  1078. * HUP signal treatment
  1079. From zebra-0.80, ripd will reload it's configuration file when ripd
  1080. receives HUP signal. Other daemon such as bgpd, ospfd will support
  1081. HUP signal treatment soon.
  1082. * Changes in zebra-0.79
  1083. * Changes in zebra
  1084. ** Broadcast address setting on Linux box bug is fixed.
  1085. ** Protocol daemon can install connected IPv6 route into the kernel.
  1086. ** Now zebra can handle blackhole route.
  1087. * Changes in ripd
  1088. ** Add route-map feature for RIP protocol.
  1089. ** In case of RIP version 2 routing table entry has IPv4 address and
  1090. netmask pair which host part bit is on, ignore the entry.
  1091. * Changes in ripngd
  1092. ** Change CMSG_DATA cast from (u_char *) to (int *). (u_char *) does
  1093. not work for NetBSD-currnet on SparcStation 10.
  1094. * Changes in ospfd
  1095. ** MaxAge LSA treatment is added.
  1096. ** ABR/ASBR functionality is added.
  1097. ** Virtual Link funtionality is added.
  1098. ** ABR behaviors IBM/Cisco/Shortcut is added.
  1099. * Changes in ospf6d
  1100. ** Enclosed KAME specific part with #ifdef #endif
  1101. * Changes in zebra-0.78
  1102. * Changes in lib
  1103. ** SNMP support is started.
  1104. ** Now Zebra can work on BSD/OS 4.X.
  1105. ** Now Zebra can compiled on vanilla OpenBSD 2.5 but not yet working correcltly.
  1106. * Changes in zebra
  1107. ** Interface index detection using ioctl() bug is fixed.
  1108. ** Interface information protocol is changed. Now interface
  1109. addition/deletion and interface's address addition/deletion is
  1110. separated.
  1111. * Changes in bgpd
  1112. ** BGP hold timer bug is fixed.
  1113. ** BGP keepavlie timer becomes configurable.
  1114. * Changes in ripd
  1115. ** When making reply to rip's REQUEST message, fill in
  1116. RIP_METRIC_INFINITY with network byte order using htonl ().
  1117. ** Pass host byte order address to IN_CLASSC and IN_CLASSB macro.
  1118. * Changes in ospfd
  1119. ** LSA flooding works.
  1120. ** Fix bug of DD processing.
  1121. ** Fix bug of originating router-LSA bug is fixed.
  1122. ** LSA structure is changed to support LSA aging.
  1123. * Changes in ospf6d
  1124. ** `ip6' statement in configuration is changed to `ipv6'.
  1125. * Changes in zebra-0.77
  1126. * Changes in lib
  1127. ** SIGUSR1 reopen logging file.
  1128. ** route-map is extended to support multi-protocol routing
  1129. information.
  1130. ** When compiling under GNU libc 2.1 environment don't use inet6-apps.
  1131. * Changes in zebra
  1132. ** Basic IPv6 router advertisement codes added. It is not yet usable.
  1133. ** Fix IPv6 route addition/deletion bug is fixed.
  1134. ** `show ip route A.B.C.D' works
  1135. * Changes in bgpd
  1136. ** When invalid unfeasible routes length comes, bgpd send notify then
  1137. continue to process the packet. Now bgpd stop parsing invalid packet
  1138. then return to main loop.
  1139. ** BGP-4+ withdrawn routes parse bug is fixed.
  1140. ** When BGP-4+ information passed to non shared network's peer, trim
  1141. link-local next-hop information.
  1142. ** `no redistribute ROUTE_TYPE' withdraw installed routes from BGP
  1143. routing information.
  1144. ** `show ipv6 route IPV6ADDR' command added.
  1145. ** BGP start timer has jitter.
  1146. ** Holdtimer configuration bug is fixed. Now configuration does not
  1147. show unconfigured hold time value.
  1148. * Changes in ripngd
  1149. ** Now update timer (default 30 seconds) has +/- 50% jitter value.
  1150. ** Add timers basic command.
  1151. ** `network' configuration is dynamically reflected.
  1152. ** `timers basic <update> <timeout> <garbage>' added.
  1153. * Changes in ripd
  1154. ** Reconstruct almost codes.
  1155. ** `network' configuration is dynamically reflected.
  1156. ** RIP timers now conforms to RFC2453. So user can configure update,
  1157. timeout, garbage timer.
  1158. ** `timers basic <update> <timeout> <garbage>' works.
  1159. * Changes in ospfd
  1160. ** Bug of originating network LSA is fixed.
  1161. ** `no router ospf' core dump bug is fixed.
  1162. * Changes in ospf6d
  1163. ** Redistribute route works.
  1164. * Changes in zebra-0.76
  1165. * Changes in lib
  1166. ** configure.in Linux IPv6 detection problem is fixed.
  1167. ** Include SERVICES file to the distribution
  1168. ** Update zebra.texi to zebra-0.76.
  1169. * Changes in zebra-0.75
  1170. * Changes in lib
  1171. ** `termnal length 0' bug is fixed.
  1172. * Changes in zebra
  1173. ** When zebra starts up, sweep all zebra installed routes. If -k or
  1174. --keep_kernel option is specified to zebra dameon. This function is
  1175. not performed.
  1176. * Changes in ripngd
  1177. ** Aggreagte address command supported. In router ripngd,
  1178. `aggregate-address IPV6PREFIX' works.
  1179. * Changes in bgpd
  1180. ** Input route-map's bug which cause segmentation violation is fixed.
  1181. ** route-map method improved.
  1182. ** BGP-4+ nexthop detection improved.
  1183. ** BGP-4+ route re-selection bug is fixed.
  1184. ** BGP-4+ iBGP route's nexthop calculation works.
  1185. ** After connection Established `show ip bgp neighbor' display BGP TCP
  1186. connection's source and destination address.
  1187. ** In case of BGP-4+ `show ip bgp neighbor' display BGP-4+ global and
  1188. local nexthop which used for originated route. This address will be
  1189. used when `next-hop-self'.
  1190. * Changes in ospfd
  1191. ** Fix bug of DR election.
  1192. ** Set IP precedence field with IPTOS_PREC_INTERNET_CONTROL.
  1193. ** Schedule NeighborChange event if NSM status change.
  1194. ** Never include a neighbor in Hello packet, when the neighbor goes
  1195. down.
  1196. * Changes in zebra-0.74
  1197. * Changes in lib
  1198. ** Now `terminal length 0' means no line output control.
  1199. ** `line LINES' command deleted. Instead of this please use `terminal
  1200. length <0-512>'.
  1201. ** `terminal length <0-512>' is each vty specific configuration so it
  1202. can not be configured in the configuration file. If you want to
  1203. configure system wide line control, please use `service
  1204. terminal-length <0-512>'. This configuration affects to the all vty
  1205. interface.
  1206. * Changes in zebra
  1207. ** Installation of IPv6 route bug is fixed.
  1208. * Changes in bgpd
  1209. ** Very serious bug of bgp_stop () is fixed. When multiple route to
  1210. the same destination exist, bgpd try to announce the information to
  1211. stopped peer. Then add orphan write thread is added. This cause
  1212. many strange behavior of bgpd.
  1213. ** Router-id parsing bug is fixed.
  1214. ** With BGP-4+ nexthop installation was done with global address but
  1215. it should be link-local address. This bug is fixed now.
  1216. ** When incoming route-map prepend AS, old AS path remained. Now bgpd
  1217. free old AS path.
  1218. ** `neighbor PEER weight <0-65535>' command added.
  1219. * Changes in ripngd
  1220. ** Almost codes are rewritten to conform to RFC2080.
  1221. * Changes in ospfd
  1222. ** SPF calculation timer is added. Currently it is set to 30 seconds.
  1223. ** SPF calculation works now.
  1224. ** OSPF routing table codes are added.
  1225. ** OSPF's internal routes installed into the kernel routing table.
  1226. ** Now `ospfd' works as non-area, non-external route support OSPF
  1227. router.
  1228. ** Call of log_rotate() is removed.
  1229. * Changes in ospf6d
  1230. ** LSA data structure is changed.
  1231. ** Call of log_rotate() is removed.
  1232. * Changes in zebra-0.73
  1233. * Changes in lib
  1234. ** `config terminal' is changed to `configure terminal'.
  1235. ** `terminal length <0-512>' command is added.
  1236. ** Variable length argument was specified by `...'. Now all strings
  1237. started with character `.' is variable length argument.
  1238. * Changes in zebra
  1239. ** Internal route (such as iBGP, internal OSPF route) handling works
  1240. correctly.
  1241. ** In interface node, `ipv6 address' and `no ipv6 address' works.
  1242. ** Interface's address remain after `no ip address' bug is fixed.
  1243. ** Host route such as IPv4 with /32 mask and IPv6 with /128 mask
  1244. didn't set RTF_GATEWAY even it has gateway. This bug if fixed now.
  1245. * Changes in bgpd
  1246. ** `match as-path' argument is used to be specify AS PATH value itself
  1247. directly (e.g. ^$). But it is changed to specify `ip as-apth
  1248. access-list' name.
  1249. ** iBGP route handle works without getting error from the kernel.
  1250. ** `set aggregator as AS A.B.C.D' command is added to route-map.
  1251. ** `set atomic-aggregate' command is added to bgpd's routemap.
  1252. ** Announcement of atomic aggregate attribute and aggregator attribute
  1253. works.
  1254. ** `update-source' bug is fixed.
  1255. ** When a route learned from eBGP is announced to iBGP, local
  1256. preference was set to zero. But now it set to
  1257. DEFAULT_LOCAL_PREF(100).
  1258. * Changes in ripd
  1259. ** RIPv1 route filter bug is fixed.
  1260. ** Some memory leak is fixed.
  1261. * Changes in ospfd
  1262. ** Fix bug of DR Election.
  1263. ** Fix bug of adjacency forming.
  1264. * Changes in ospf6d
  1265. ** Clean up logging message.
  1266. ** Reflect routing information to zebra daemon.
  1267. * Changes in zebra-0.72
  1268. * Changes in lib
  1269. ** When getsockname return IPv4 mapped IPv6 address. Convert it to
  1270. IPv4 address.
  1271. * Changes in bgpd
  1272. ** Change route-map's next-hop related settings.
  1273. set ip nexthop -> set ip next-hop
  1274. set ipv6 nexthop global -> set ipv6 next-hop global
  1275. set ipv6 nexthop local -> set ipv6 next-hop local
  1276. ** Add `next-hop-self' command.
  1277. * Changes in ospfd
  1278. ** Fix bug of multiple `network area' directive crashes.
  1279. * Changes in zebra-0.71
  1280. * Changes in lib
  1281. ** `log syslog' command is added.
  1282. ** Use getaddrinfo function to bind IPv4/IPv6 server socket.
  1283. ** `no banner motd' will suppress motd output when user connect to VTY.
  1284. ** Bind `quit' command to major nodes.
  1285. * Changes in zebra
  1286. ** Point-to-point link address handling bug is fixed.
  1287. * Changes in bgpd
  1288. ** AS path validity check is added. If malformed AS path is received
  1289. NOTIFY Malformed AS path is send to the peer.
  1290. ** Use getaddrinfo function to bind IPv4/IPv6 server socket.
  1291. * Changes in ripd
  1292. ** Connected network announcement bug is fixed.
  1293. ** `broadcast' command is deleted.
  1294. ** `network' command is added.
  1295. ** `neighbor' command is added.
  1296. ** `redistribute' command is added.
  1297. ** `timers basic' command is added.
  1298. ** `route' command is added.
  1299. * Changes in ripngd
  1300. ** Fix metric calculation bug.
  1301. * Changes in ospfd
  1302. ** Check sum bug is fixed.
  1303. * Chanegs in ospf6d
  1304. ** Routing table code is rewritten.
  1305. * Changes in zebra-0.70
  1306. * Changes in zebra
  1307. ** Critical routing information base calculation bug check is fixed.
  1308. ** zebra ipv4 message is extended to support external/internal route
  1309. flavor.
  1310. ** Now if internal route doesn't has direct connected nexthop, then
  1311. nexthop is calculated by looking up IGP routing table.
  1312. * Changes in bgpd
  1313. ** `neighbor PEER update-source IFNAME' command added as ALIAS to
  1314. `neighbor PEER interface IFNAME'.
  1315. * Changes in ospfd
  1316. ** DD null pointer bug is fixed.
  1317. * Changes in zebra-0.69
  1318. * Changes in zebra
  1319. ** zebra redistirbution supports dynamic notification of the route
  1320. change. If you add static route while running zebra, it will be
  1321. reflected to other protocol daemon which set `redistribute static'.
  1322. ** If static route installation is failed due to the error. The
  1323. static route is not added to the configuration and zebra routing
  1324. table.
  1325. ** zebra sets forwarding flag to on when it starts up.
  1326. ** `no ip forwarding' turn off IPv4 forwarding.
  1327. ** `no ipv6 forwarding' turn off IPv6 forwarding.
  1328. ** Change `show ipforward' command to `show ip forwarding'.
  1329. ** Change `show ipv6forward' command to `show ipv6 forwarding'.
  1330. ** `ip route A.B.C.D/M INTERFACE' works. So you can set `ip route
  1331. 10.0.0.0/8 eth0'.
  1332. * Changes in bgpd
  1333. ** `neighbor PEER send-community' command is added. If the option is
  1334. set, bgpd will send community attribute to the peer.
  1335. ** When a BGP route has no-export community attribute and
  1336. send-community is set to the peer, the route is not announced to the
  1337. peer.
  1338. * Changes in ripngd
  1339. ** When ripngd terminates, delete all installed route.
  1340. ** `redistribute static', `redistribute connected' works.
  1341. ** Change `debug ripng event' to `debug ripng events'.
  1342. ** Change `show debug ripng' to `show debugging ripng'.
  1343. ** Bug of static route deletion is fixed.
  1344. * Changes in ospfd
  1345. ** LS request and LS update can be send and received.
  1346. * Changes in zebra-0.68
  1347. * Changes in lib
  1348. ** DEFUN() is extended to support (a|b|c) statement.
  1349. ** Input buffer overflow bug is fixed.
  1350. * Changes in bgpd
  1351. ** `ip community-list' is added.
  1352. ** set community and match community is added to route-map statement.
  1353. ** aggregate-address A.B.C.D/M partly works. Now it works only
  1354. summary-only mode.
  1355. * Changes in zebra
  1356. ** IPv6 network address delete bug is fixed.
  1357. * Changes in ospfd
  1358. ** DR election bug fixed.
  1359. ** Now Database Description can be send or received.
  1360. ** Neighbor State Machine goes to Full state.
  1361. * Changes in ospf6d
  1362. ** router zebra related bug is fixed.
  1363. * Changes in zebra-0.67
  1364. * Changes in lib
  1365. ** `service password-encryption' is added for encrypted password.
  1366. * Changes in bgpd
  1367. ** `set as-path prepend ASPATH' is added to route-map command.
  1368. ** `set weight WEIGHT' is added to route-map command.
  1369. ** `no set ipv6 nexthop global' and `no set ipv6 nexthop local'
  1370. command is added to route-map.
  1371. ** `neighbor IP_ADDR version BGP_VERSION' command's BGP_VERSION
  1372. argument changed.
  1373. Old New
  1374. =====================
  1375. bgp4 4
  1376. bgp4+ 4+
  1377. bgp4+-draft-00 4-
  1378. =====================
  1379. If you want to peer with old draft version of BGP-4+, please configure
  1380. like below:
  1381. router bgp ASN
  1382. neighbor PEER version 4-
  1383. ** Some AS path isn't correctly compared during route selection. Now
  1384. it is fixed.
  1385. * Changes in ospfd
  1386. ** `router zebra' is default behavior.
  1387. * Changes in ospf6d
  1388. ** `router zebra' is default behavior.
  1389. * Changes in zebra-0.66
  1390. * Changes in zebra
  1391. ** When other daemon such as gated install routes into the kernel then
  1392. zebra blocks. This is only occur with netlink socket. Now socket is
  1393. set as NONBLOCKING and problem is fixed. Reported and fixed by
  1394. Patrick Koppen <koppen@rhrk.uni-kl.de>
  1395. * Changes in bgpd
  1396. ** Now `router zebra' is not needed to insert BGP routes into the
  1397. kernel. It is default behavior. If you don't want to install the BGP
  1398. routes to the kernel, please configure like below:
  1399. !
  1400. router zebra
  1401. no redistribute bgp
  1402. !
  1403. ** redistribute connected works.
  1404. ** redistribute static now filter local loopback routes and link local
  1405. network.
  1406. * Changes in ripd
  1407. ** Some network check is added. Patch is done by Carlos Alberto
  1408. Barcenilla <barce@frlp.utn.edu.ar>
  1409. * Changes in ripngd
  1410. ** Sometimes ripngd install wrong nexthop into the kernel. This bug
  1411. is fixed now.
  1412. ** Now `router zebra' is not needed to insert RIPng routes into the
  1413. kernel. It is default behavior. If you don't want to install the BGP
  1414. routes to the kernel, please configure like below:
  1415. !
  1416. router zebra
  1417. no redistribute ripng
  1418. !
  1419. * Changes in zebra-0.65
  1420. * Changes in lib
  1421. ** `C-c' changes current node to ENABLE_NODE. Previously it doesn't.
  1422. ** In ENABLE_NODE, `exit' command close vty connection.
  1423. ** `service advanced-vty' enable advanced vty function. If this
  1424. service is specified one can directly connect to ENABLE_NODE when
  1425. enable password is not set.
  1426. ** `lines LINES' command is added by Stephen R. van den Berg
  1427. <srb@cuci.nl>.
  1428. * Changes in zebra
  1429. ** Basic Linux policy based routing table support is added by Stephen
  1430. R. van den Berg <srb@cuci.nl>.
  1431. * Changes in bgpd
  1432. ** route-map command is improved:
  1433. `match ip next-hop': New command.
  1434. `match metric': New command.
  1435. `set metric': Doc fixed.
  1436. `set local-preference': DEFUN added.
  1437. * Changes in ripd
  1438. ** Check of announced network is added. Now multicast address is
  1439. filtered. Reported by Carlos Alberto Barcenilla
  1440. <barce@frlp.utn.edu.ar>
  1441. ** Check of network 127 is added. Reported by Carlos Alberto
  1442. Barcenilla <barce@frlp.utn.edu.ar>
  1443. * Changes in ripngd
  1444. ** Aging route bug is fixed.
  1445. ** `router zebra' semantics changed. ripngd automatically connect to
  1446. zebra.
  1447. * Changes in ospfd
  1448. ** `no router ospf' works.
  1449. * Changes in ospf6d
  1450. ** Bug fix about network vertex.
  1451. * Changes in zebra-0.64.1.
  1452. This is bug fix release.
  1453. * Changes in lib
  1454. ** Add check of sin6_scope_id in struct sockaddr_in6. For compilation
  1455. on implementation which doesn't have sin6_scope_id. Reported by Wim
  1456. Biemolt <Wim.Biemolt@ipv6.surfnet.nl>.
  1457. * Changes in zebra
  1458. ** Fix bug of display BGP routes as "O" instead of "B". Reported by
  1459. "William F. Maton" <wmaton@enterprise.ic.gc.ca> and Dave Hartzell
  1460. <hartzell@greatplains.net>.
  1461. * Changes in bgpd
  1462. ** `no network IPV6_NETWORK' statement and `no neighbor IP_ADDR timers
  1463. holdtime [TIMER]' statement doesn't work. Reported by Georg Hitsch
  1464. <georg@atnet.at>. Now both statement work.
  1465. * Changes in ospfd
  1466. ** Last interface is not updated by ospf_if_update(). Reported by
  1467. Dave Hartzell <hartzell@greatplains.net>.
  1468. * Changes in ospf6d
  1469. ** Byte order of ifid is changed. Due to this change, this code will
  1470. not work with previous version, sorry.
  1471. ** Fix `show ip route' route type mismatch.
  1472. ** Fix bug of no network IPV6_NETWORK.
  1473. ** Important bug fix about intra-area-prefix-lsa.
  1474. * Changes in zebra-0.64.
  1475. * Changes in lib
  1476. ** prefix-list based filtering routine is added. Currently used in
  1477. bgpd but it will be in other daemons.
  1478. * Changes in bgpd
  1479. ** `no router bgp' works. But network statement is not cleared. This
  1480. should be fixed in next beta.
  1481. ** Route reflector related statement is added.
  1482. router bgp ASN
  1483. bgp cluster-id a.b.c.d
  1484. neighbor a.b.c.d route-reflector-client
  1485. is added.
  1486. ** Prefix list based filtering is added.
  1487. router bgp ASN
  1488. neighbor a.b.c.d prefix-list PREFIX_LIST_NAME
  1489. ** Prefix list based routing display works.
  1490. show ip bgp prefix-list PREFIX_LIST_NAME
  1491. * Changes in ripd
  1492. ** Fix route metric check bug. Reported from Mr. Carlos Alberto
  1493. Barcenilla.
  1494. * Changes in ospf6d
  1495. ** There are many changes. If you have interested in ospf6d please
  1496. visit ospf6d/README file.
  1497. * Changes in zebra-0.63 first beta package.
  1498. * Changes in lib
  1499. ** `copy running-config stgartup-config' command is added.
  1500. ** prefix length check bug is fixed. Thanks Marlos Barcenilla
  1501. <barce@frip.utn.edu.ar>.
  1502. * Changes in ospfd
  1503. ** DR and BDR election works.
  1504. ** OSPF Hello simple authentication works.
  1505. * Changes in ospf6d
  1506. ** Now ospf6d can be compiled on both Linux and *BSD system.
  1507. * Changes in zebra-19990420 snapshot
  1508. ** `make dist' at top directory works now.
  1509. * Changes in lib
  1510. ** VTY has now access-class to restrict remote connection.
  1511. Implemented by Alex Bligh <amb@gxn.net>.
  1512. !
  1513. line vty
  1514. access-class ACCESS-LIST-NAME
  1515. !
  1516. ** `show version' command added. Implemented by Carlos Alberto
  1517. Barcenilla <barce@frlp.utn.edu.ar>
  1518. * Changes in zebra
  1519. ** `ip address' command on *BSD bug is fixed.
  1520. ** `no ip address' works now for IPv4 address.
  1521. ** Now `write terminal' display `ip address' configuration.
  1522. * Changes in bgpd
  1523. ** Redistribute static works now. Please run both zebra and bgpd.
  1524. bgpd.conf should be like this:
  1525. !
  1526. router zebra
  1527. !
  1528. router bgp ASN
  1529. redisitribute static
  1530. !
  1531. * Changes in guile
  1532. ** configure --enable-guile turns on zebra-guile build.
  1533. ** (router-bgp ASN) allocates real bgp structre.
  1534. * Changes in zebra-19990416 snapshot
  1535. ** Set version to 0.60 for preparation of beta release.
  1536. ** New directory guile is added for linking with guile interpreter.
  1537. * Changes in zebra
  1538. ** On GNU/Linux Kernel 2.2.x (with netlink support), zebra detects
  1539. asynchronous routing updates. *BSD support is not yet finished.
  1540. * Changes in bgpd
  1541. ** `show ip bgp regexp ASPATH_REGEX' uses CISCO like regular expression
  1542. instead of RPSL like regular expression. I'm planing to provide RPSL
  1543. like regular expression with `show ip bgp rpsl' or something.
  1544. * Changes in lib
  1545. ** Press '?' at variable mandatory argument, vty prints nothing. Now
  1546. vty outputs description about the argument. Fixed by Alex Bligh
  1547. <amb@gxn.net>
  1548. ** buffer.c has some ugly bugs. Due to the bug, vty interface hangs
  1549. when large output date exists. This bug is fixed. Reported by Alex
  1550. Bligh <amb@gxn.net>.
  1551. * Changes in ospfd
  1552. ** DR and BDR information is shown by `show ip ospf interface' command.
  1553. * Changes in zebra-19990408 snapshot
  1554. * Changes in bgpd
  1555. ** Old BGP-4+ specification (described in old draft) treatment bug is
  1556. fixed. It seems that mrtd uses this format as default. So if you
  1557. have problem peering with mrtd and want to use old draft format please
  1558. use version statement like this.
  1559. neighbor PEER_ADDRESS remote-as ASN
  1560. neighbor PEER_ADDRESS version bgp4+-draft-00
  1561. ** When AS path is epmty (routes generated by bgpd), SEGV is occur
  1562. when announce the routes to eBGP peer. Reported by
  1563. kad@gibson.skif.net.
  1564. ** ip as-path access-list command is added.
  1565. ** neighbor PEER_ADDRESS filter-list AS_LIST [in|out] command is added.
  1566. ** neighbor PEER_ADDRESS timers holdtimer TIMER command is added.
  1567. * Changes in all daemons
  1568. ** With KAME stack, terminal interface is now bind AF_INET socket
  1569. instead of AF_INET6 one.
  1570. * Changes in zebra-19990403 snapshot
  1571. * Changes in bgpd
  1572. ** When bgpd has 'router zebra', bgpd automatically select it's router
  1573. ID as most highest interface's IP Address.
  1574. ** When AS path is empty (in case of iBGP), it doesn't include any AS
  1575. segment. This change is for announcement to gated under iBGP.
  1576. * Changes in ospfd
  1577. ** OSPF hello packet send/receive works.
  1578. * Changes in ospf6d
  1579. ** Yasuhiro Ohara's ospf6d codes is imported. It is under development
  1580. and can't be compiled on any platform.
  1581. * Changes in zebra-19990327 snapshot
  1582. * Changes in bgpd
  1583. ** When BGP-4+ connection is done by IPv6 link-local address. One
  1584. have to specify interface index for the connection. So I've added
  1585. interface statement to the neighbor commmand. Please specify
  1586. interface name for getting interface index like below. This statement
  1587. only works on GNU/Linux. I'll support BSD ASAP.
  1588. router bgp 7675
  1589. neighbor fe80::200:f8ff:fe01:5fd3 remote-as 2500
  1590. neighbor fe80::200:f8ff:fe01:5fd3 interface sit3
  1591. ** For disable BGP peering `shutdown' command is added.
  1592. router bgp 7675
  1593. neighbor 10.0.0.1 shutdown
  1594. ** `description' command is added to neighbor statement.
  1595. router bgp 7675
  1596. neighbor 10.0.0.1 description peering with Norway.
  1597. ** `show ip bgp regexp AS-REGEXP' works again.
  1598. show ip bgp regexp AS7675
  1599. will show routes which include AS7675.
  1600. ** When a route which is made from `network' statement is send to
  1601. neighbor. Set it's nexthop to self. So 10.0.0.0/8 is announced to
  1602. the peer A with source address 192.168.1.1. The routes nexthop is set
  1603. to 192.168.1.1.
  1604. * Changes in zebra
  1605. ** In zebra/rtread_sysctl.c, function rtm_read() may overrun allocated
  1606. buffer when the address family is not supported and the length is big
  1607. (i.e link address). Reported Achim Patzner <ap@bnc.net>.
  1608. * Changes in ospfd
  1609. ** Now ospfd receive OSPF packet.
  1610. * Changes in zebra-19990319 snapshot
  1611. * Changes in configuration and libraries
  1612. ** User can disable IPv6 feature and/or pthread feature by configure
  1613. option.
  1614. To disable IPv6: configure --disable-ipv6
  1615. To disable pthread: configure --disable-pthread
  1616. ** User can disable specified daemon by configure option.
  1617. Don't make zebra: configure --disable-zebra
  1618. Don't make bgpd: configure --disable-bgpd
  1619. Don't make ripd: configure --disable-ripd
  1620. Don't make ripngd: configure --disable-ripngd
  1621. Don't make ospfd: configure --disable-ospfd
  1622. Don't make ospf6d: configure --disable-ospf6d
  1623. ** Sample configuration files are installed as 600 file flag.
  1624. Suggested by Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>.
  1625. ** syslog logging feature is added by Peter Galbavy
  1626. <Peter.Galbavy@knowledge.com>
  1627. ** Inclusion of standard header files is reworked by Peter Galbavy
  1628. <Peter.Galbavy@knowledge.com>
  1629. ** Change description from GNU/Linux 2.1.X to GNU/Linux 2.2.X
  1630. ** If daemon function exists in standard C library use it.
  1631. ** To generate configure script we upgrade autoconf to 2.13. To
  1632. generate Makefile.in we upgrade automake to 1.4.
  1633. ** doc/texinfo.tex is added to distribution.
  1634. ** Update ports/pkg/DESCR description.
  1635. ** Update doc/zebra.texi.
  1636. ** logfile FILENAME statement deleted. Instead of that please use log
  1637. file FILENAME.
  1638. * Changes in zebra
  1639. * Changes in bgpd
  1640. ** Communication between zebra and bgpd works now. So if there is
  1641. `router zebra' line in bgpd.conf, selected route is installed
  1642. into kernel routing table.
  1643. ** Delete all routes which inserted by bgpd when bgpd dies. If you
  1644. want to retain routes even bgpd dies please specify [-r|--retain]
  1645. option to bgpd.
  1646. ** BGP announcement code is reworked. Now bgpd announce selected
  1647. routes to other peer.
  1648. ** All output bgp packet is buffered. It's written to the socket when
  1649. it gets ready.
  1650. ** Output route-map works now. You can specify output route-map by:
  1651. neighbor IP_ADDR route-map ROUTE_MAP_NAME out
  1652. ** New route-map command added.
  1653. set ip nexthop IP_ADDR
  1654. set ipv6 nexthop global IP_ADDR
  1655. ** Fix bug about unlock of the route_node structure.
  1656. ** BGP-4+ support is added. bgpd can listen and speak BGP-4+ packet
  1657. specified in RFC2283. You can view IPv6 bgp table by: `show ipv6 bgp'.
  1658. ** Meny packet overflow check is added.
  1659. * Changes in ripd
  1660. * Changes in ripngd
  1661. * Changes in ospfd
  1662. ** ospfd work is started by Toshiaki Takada <takada@zebra.org>. Now
  1663. several files are included in ospfd directory.
  1664. ** ospf6d codes are merged from Yasuhiro Ohara <yasu@sfc.wide.ad.jp>'s
  1665. ospfd work. Now codes are located in ospf6d directory.
  1666. Local variables:
  1667. mode: outline
  1668. paragraph-separate: "[ ]*$"
  1669. end: