Browse Source

[ospfd] Implement new ospf router subcommand "log-adjacency-changes [detail]"

2006-06-28 Erik Muller <erikm@internap.com>

	* ospfd.h: Define 2 new struct ospf config flags:
	  OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL
	* ospf_nsm.c (nsm_change_state): Log adjacency changes if
	  requested.
	* ospf_vty.c (ospf_log_adjacency_changes): New command function
	  to implement ospf subcommand "log-adjacency-changes [detail]".
	  (no_ospf_log_adjacency_changes) Turn off log-adjacency-changes.
	  (show_ip_ospf) Show whether adjacency changes are logged.
	  (ospf_config_write) Add "log-adjacency-changes [detail]" to config.
	  (ospf_vty_init) Add ospf_log_adjacency_changes and
	  no_ospf_log_adjacency_changes.
	* ospfd.texi: Document new ospf router subcommand
	  "log-adjacency-changes [detail]".
Andrew J. Schorr 14 years ago
parent
commit
d7e60dd7a9
6 changed files with 116 additions and 3 deletions
  1. 5 0
      doc/ChangeLog
  2. 7 0
      doc/ospfd.texi
  3. 14 0
      ospfd/ChangeLog
  4. 11 1
      ospfd/ospf_nsm.c
  5. 77 2
      ospfd/ospf_vty.c
  6. 2 0
      ospfd/ospfd.h

+ 5 - 0
doc/ChangeLog

@@ -1,3 +1,8 @@
+2006-06-28 Erik Muller <erikm@internap.com>
+
+	* ospfd.texi: Document new ospf router subcommand
+	  "log-adjacency-changes [detail]".
+
 2006-06-26 Paul Jakma <paul.jakma@sun.com>
 
 	* ospfd.texi: Document that MD5 keyid is part of the protocol.

+ 7 - 0
doc/ospfd.texi

@@ -90,6 +90,13 @@ but still both preferred to external paths.
 This command should NOT be set normally.
 @end deffn
 
+@deffn {OSPF Command} {log-adjacency-changes [detail]} {}
+@deffnx {OSPF Command} {no log-adjacency-changes [detail]} {}
+Configures ospfd to log changes in adjacency.  With the optional
+detail argument, all changes in adjacency status are shown.  Without detail,
+only changes to full or regressions are shown.
+@end deffn
+
 @deffn {OSPF Command} {passive interface @var{interface}} {}
 @deffnx {OSPF Command} {no passive interface @var{interface}} {}
 

+ 14 - 0
ospfd/ChangeLog

@@ -1,3 +1,17 @@
+2006-06-28 Erik Muller <erikm@internap.com>
+
+	* ospfd.h: Define 2 new struct ospf config flags:
+	  OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL
+	* ospf_nsm.c (nsm_change_state): Log adjacency changes if
+	  requested.
+	* ospf_vty.c (ospf_log_adjacency_changes): New command function
+	  to implement ospf subcommand "log-adjacency-changes [detail]".
+	  (no_ospf_log_adjacency_changes) Turn off log-adjacency-changes.
+	  (show_ip_ospf) Show whether adjacency changes are logged.
+	  (ospf_config_write) Add "log-adjacency-changes [detail]" to config.
+	  (ospf_vty_init) Add ospf_log_adjacency_changes and
+	  no_ospf_log_adjacency_changes.
+
 2006-06-26 Paul Jakma <paul.jakma@sun.com>
 
 	* ospf_abr.c: (general) NSSA translate-candidate ABRs need to

+ 11 - 1
ospfd/ospf_nsm.c

@@ -697,7 +697,17 @@ nsm_change_state (struct ospf_neighbor *nbr, int state)
 
   if (oi->type == OSPF_IFTYPE_VIRTUALLINK)
     vl_area = ospf_area_lookup_by_area_id (oi->ospf, oi->vl_data->vl_area_id);
-  
+
+  /* Optionally notify about adjacency changes */
+  if (CHECK_FLAG(oi->ospf->config, OSPF_LOG_ADJACENCY_CHANGES) &&
+      (old_state != state) &&
+      (CHECK_FLAG(oi->ospf->config, OSPF_LOG_ADJACENCY_DETAIL) ||
+       (state == NSM_Full) || (state < old_state)))
+    zlog_notice("AdjChg: Nbr %s on %s: %s -> %s",
+		inet_ntoa (nbr->router_id), IF_NAME (nbr->oi),
+		LOOKUP (ospf_nsm_state_msg, old_state),
+		LOOKUP (ospf_nsm_state_msg, state));
+
 #ifdef HAVE_SNMP
   /* Terminal state or regression */ 
   if ((state == NSM_Full) || (state == NSM_TwoWay) || (state < old_state))

+ 77 - 2
ospfd/ospf_vty.c

@@ -2056,6 +2056,56 @@ DEFUN (no_ospf_abr_type,
   return CMD_SUCCESS;
 }
 
+DEFUN (ospf_log_adjacency_changes,
+       ospf_log_adjacency_changes_cmd,
+       "log-adjacency-changes",
+       "Log changes in adjacency state\n")
+{
+  struct ospf *ospf = vty->index;
+
+  SET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES);
+  return CMD_SUCCESS;
+}
+
+DEFUN (ospf_log_adjacency_changes_detail,
+       ospf_log_adjacency_changes_detail_cmd,
+       "log-adjacency-changes detail",
+       "Log changes in adjacency state\n"
+       "Log all state changes\n")
+{
+  struct ospf *ospf = vty->index;
+
+  SET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES);
+  SET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL);
+  return CMD_SUCCESS;
+}
+
+DEFUN (no_ospf_log_adjacency_changes,
+       no_ospf_log_adjacency_changes_cmd,
+       "no log-adjacency-changes",
+       NO_STR
+       "Log changes in adjacency state\n")
+{
+  struct ospf *ospf = vty->index;
+
+  UNSET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL);
+  UNSET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES);
+  return CMD_SUCCESS;
+}
+
+DEFUN (no_ospf_log_adjacency_changes_detail,
+       no_ospf_log_adjacency_changes_detail_cmd,
+       "no log-adjacency-changes detail",
+       NO_STR
+       "Log changes in adjacency state\n"
+       "Log all state changes\n")
+{
+  struct ospf *ospf = vty->index;
+
+  UNSET_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL);
+  return CMD_SUCCESS;
+}
+
 DEFUN (ospf_compatible_rfc1583,
        ospf_compatible_rfc1583_cmd,
        "compatible rfc1583",
@@ -2676,8 +2726,18 @@ DEFUN (show_ip_ospf,
 	   ospf_lsdb_checksum (ospf->lsdb, OSPF_OPAQUE_AS_LSA), VTY_NEWLINE);
 #endif /* HAVE_OPAQUE_LSA */
   /* Show number of areas attached. */
-  vty_out (vty, " Number of areas attached to this router: %d%s%s",
-           listcount (ospf->areas), VTY_NEWLINE, VTY_NEWLINE);
+  vty_out (vty, " Number of areas attached to this router: %d%s",
+           listcount (ospf->areas), VTY_NEWLINE);
+
+  if (CHECK_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES))
+    {
+      if (CHECK_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL))
+	vty_out(vty, " All adjacency changes are logged%s",VTY_NEWLINE);
+      else
+	vty_out(vty, " Adjacency changes are logged%s",VTY_NEWLINE);
+    }
+
+  vty_out (vty, "%s",VTY_NEWLINE);
 
   /* Show each area status. */
   for (ALL_LIST_ELEMENTS (ospf->areas, node, nnode, area))
@@ -7752,6 +7812,15 @@ ospf_config_write (struct vty *vty)
         vty_out (vty, " ospf abr-type %s%s", 
                  ospf_abr_type_str[ospf->abr_type], VTY_NEWLINE);
 
+      /* log-adjacency-changes flag print. */
+      if (CHECK_FLAG(ospf->config, OSPF_LOG_ADJACENCY_CHANGES))
+	{
+	  vty_out(vty, " log-adjacency-changes");
+	  if (CHECK_FLAG(ospf->config, OSPF_LOG_ADJACENCY_DETAIL))
+	    vty_out(vty, " detail");
+	  vty_out(vty, "%s", VTY_NEWLINE);
+	}
+
       /* RFC1583 compatibility flag print -- Compatible with CISCO 12.1. */
       if (CHECK_FLAG (ospf->config, OSPF_RFC1583_COMPATIBLE))
 	vty_out (vty, " compatible rfc1583%s", VTY_NEWLINE);
@@ -8123,6 +8192,12 @@ ospf_vty_init (void)
   install_element (OSPF_NODE, &ospf_abr_type_cmd);
   install_element (OSPF_NODE, &no_ospf_abr_type_cmd);
 
+  /* "ospf log-adjacency-changes" commands. */
+  install_element (OSPF_NODE, &ospf_log_adjacency_changes_cmd);
+  install_element (OSPF_NODE, &ospf_log_adjacency_changes_detail_cmd);
+  install_element (OSPF_NODE, &no_ospf_log_adjacency_changes_cmd);
+  install_element (OSPF_NODE, &no_ospf_log_adjacency_changes_detail_cmd);
+
   /* "ospf rfc1583-compatible" commands. */
   install_element (OSPF_NODE, &ospf_rfc1583_flag_cmd);
   install_element (OSPF_NODE, &no_ospf_rfc1583_flag_cmd);

+ 2 - 0
ospfd/ospfd.h

@@ -181,6 +181,8 @@ struct ospf
   u_char config;
 #define OSPF_RFC1583_COMPATIBLE         (1 << 0)
 #define OSPF_OPAQUE_CAPABLE		(1 << 2)
+#define OSPF_LOG_ADJACENCY_CHANGES	(1 << 3)
+#define OSPF_LOG_ADJACENCY_DETAIL	(1 << 4)
 
 #ifdef HAVE_OPAQUE_LSA
   /* Opaque-LSA administrative flags. */